Fix PC Solo

How to Fix USB Device Not Recognized in windows

In time, when you plug yours USB device to your windows, you maybe receive pop up massage. If your USB device is not detected, then this pop up will show you how you can repair this issue.

How to Fix USB Device Not Recognized in windows

- A simple way is restart of the windows computer. Unplug your USB. Restart and plug in and see if it works. If it does not, shut down your computer, wait for a few minutes and then start your computer again.

- Disconnect your other USB’s, connect this one and see if it helps.

- Run device manager and select action tab, and click Scan for hardware changes and see if help.

- Check if you need to update your drivers. Open Control Panel > Printers and devices. Check if you can see any entry for Unidentified USB device or Unknown Device. Open its Properties and update its driver, if an update is found to be available.

By allow the computer to turn a device to save power.

Run the Hardware and Device Troubleshooter or the Windows USB Troubleshooter and check if it helps. The automated tools check the hardware or USB connected to the computer for any known issues and fix them automatically

How to Fix USB Device Not Recognized in windows

Maybe this posting will continue to next post

Posted in: Computer, How To, usb | Posted by : Admin

How to Start Windows 8 in Safe Mode

Windows 8 is the latest operating system from Microsoft which is the latest product after Windows 7. Unlike its predecessor, Windows 8 is a touch-based operating system. No wonder that how to use Windows 8 also have differences compared to Windows 7 or Windows XP.

Compared with Windows 7, of how to use Windows 8 will differ greatly. Perhaps even many users of Windows computers are not familiar with how to use the features of Microsoft's latest operating system is.

So even the case when we want to get into safe mode on Windows 8. How to enter safe mode in Windows 8 will be much different when compared to the previous Windows products. Typically, Windows users simply press the F8 key at boot time to be able to access safe mode. But this way it will not be done in Windows 8.

This is because a computer that uses Windows 8 has a short boot time. Especially if you have been using SSD and UEFI firmware. Happens, you will not have time to press the F8 key. Especially on Windows 8, go into safe mode takes the process a little longer. Then how to use Windows 8 to get into safe mode? The following are steps that can You do:

• The first step, Press Shift + Restart

• The second step, the next page will appear asking you to choose three options. Select Troubleshoot

• The third step, after entering into the Troubleshoot option, there are three options and select Advanced Options

• Step four, You will get more options and select the Startup Settings option

• Step five, further information will appear if there is an option to replace the restart Windows. These include the Safe mode is enabled. Here, you select Restart button

• Steps to six, after the restart, will appear nine of these are options including Safe Mode, Safe Mode with Networking, and Safe Mode with Command Prompt. You can choose safe mode option you want liking. For example, if you want to safe mode, then press the F5 key. Or pressing the F6 key to Safe Mode with networking option.

After all the above process is done, then the computer or tablet Windows 8 belongs you will be included in Safe Mode with a view that is not much different than previous versions of Windows. Furthermore, if you want to get out of Safe Mode, then just reboot. After reboot, the computer will boot normally.

Posted in: Computer, How To, windows 8 | Posted by : Admin

How To Use Ccleaner to Fix Computer Error

CCleaner is a software which I think is very useful for computer users or laptop operating system Windows, as CCleaner helps us to clear the cache of the Internet or the rest of the history of the use of our day - the day so as not to burden the hard drive if the unused files are not deleted.

in accordance with the title now I will explain the most complete way to use CCleaner who has not really understand what functions and how to use this software. This article is made with my personal experience.

Step - Step Install CCleaner

1. Please open the folder that has been my friend CCleaner software downloaded on your PC / Laptop / NoteBook, etc., if my friend had not been able to download CCleaner here. Find the setup file double-click the icon, and then look for the language look like next button.Go to next stage

How To Use Ccleaner to Fix Computer Error 1

2. Click Next "follow the yellow text that is blocked". Further next stage

How To Use Ccleaner to Fix Computer Error 2

3. Click the I Agree and further next stage

How To Use Ccleaner to Fix Computer Error 3

4. if does not want the latest CCleaner update itself when connected to the internet, you can uncheck the Automatically check for updates to CCleaner,. then click Install it and enter the next setup

How To Use Ccleaner to Fix Computer Error 4

6. Click Finish .. finished !!! easy not.

How To Use Ccleaner to Fix Computer Error 5

Note: "In this article I use the example CCleaner 3:16 version, if you using a different version of CCleaner is not a problem because almost exactly".

Tutorial using CCleaner

at the point that I often use the software CCleaner is just to delete the browser history so its use is quite easy and fast, but if you want to know more detail the use of the features that this software -Features provide then you see - good explanation of i am.

There Cleaner menu tabs windows when my friend click the Analyze button will display a list of files that are not used (junk) overall on the computer buddy. then if my friend wants to remove it just click the Run Cleaner button ...

How To Use Ccleaner to Fix Computer Error 6

so also in the tabs Applications almost exactly the way and only a function but dibedakannya trash gathered.

- On how to use the Registry menu tantamount click the Scan for Issues and Fix Selected Issues button to start deleting the registry list, then will appear as follows;

How To Use Ccleaner to Fix Computer Error 7

Note "if too frequent deletion on the Registry menu can be damage to the application - the application on the computer tepasang pal, if it does not want to happen is better not to do."

- On the Tools menu there is a sub menu Uninstall, Starup, System Restore, Driver Wiper:

1. Uninstall -> serves to remove the applications installed on the computer buddy, almost the same as deleting friend via Control Panel-> Programs-> Uninstall a difference these programs use / application in CCleaner, how to eliminate it click one application programs to be deleted later Uninstaler click the Run button.

2. Starup-> function sub menu starup to CCleaner here to shut down the existing applications on the computer when the computer is turned on and start the process until the computer is on.

3. System Restore -> function returns the settings - the original settings when the computer reinstall pal, it was if my friend did not forget to make the system restore. if there be found in the list box on the right menu System Restore.

- On the menu there is a sub-menu option Settings, Cookies, Include, Exclude, Advance, About:

1. Settings -> function to adjust some settings CCleaner.

2. Cookies -> as residing in the browser history, cookies here serves to remove or it could be to save.

3. Include -> function to add or select files and folders that will just erase.

4. Exclude -> function selecting a registry file that will just erase.

5. Advanced -> function set CCleaner setting the level of further / more detail.

6. About -> information about the product.

okeh deh friend .. so this article I am using the latest CCleaner

Posted in: | Posted by : Admin

How to Fix IP Address Conflict

IP Address Conflict is usually temporary, but usually these issues will be completed by itself. In this paper we will discuss what is causing this problem and how to deal with it.

Suppose that at the moment we are using the computer and suddenly notice "There Is an IP address conflict with another system on the network". At that point we realized that we are no longer able to access the Internet, the connection to be disconnected and can not be used anymore.

Things like this often happens to a lot of users in the network and an error message is displayed seems not much help to resolve this issue. Unfortunately, this conflict is temporary and will be finished by itself. However, we do not know when this will happen and usually does not occur when the settlement was too, takes time, sometimes need to reboot to eliminate the problem.

To be able to resolve the IP address conflict issues, need to understand first what exactly the conflict. To be able to communicate in a network, a system must have an IP address and must be unique, at least in our own network. If two devices have the same IP address will be detected and then the second network interface devices they will be turned off resulting in lost connections, until the conflict is resolved. So, what exactly is causing this conflict? A common issue is if the two systems are given identical IP addresses statically (manually). This generally occurs on the network that do not apply the system DHCP (Dynamic Host Control Protocol), as we often encounter on the network with DHCP kecil.Server scale are also commonly found in almost all routers use a set of IP Address as prepared (called a scope) so that he could distribute the addresses to respond to the request. However, the scope of the DHCP by default in most existing router, occupying the entire address is available, then one device that uses a static address in the network will lead to conflict, if the address has been given by the DHCP server to other users. We can minimize the possibility of conflict by reducing the number of addresses stored in the DHCP server pool (reduce scope), to fit the needs at that time. Thus, we still leaves a bunch of other addresses that can be assigned statically if necessary.

The IP address conflict issues will still arise even if we have chosen not to use static addressing, and fully implement automatic addressing through DHCP server. For example, in some cases we may have more than one DHCP server has been configured with the same settings, so they can overlap addressing. This often happens if we have some wireless access points or other network devices that also have a DHCP server in it and will work immediately when switched on. Therefore should we have only one DHCP server and make sure the other device has been turned off.

Other causes that lead to the problem of conflict is when a system back online from standby or hibernate state, especially if the system is a network of different members of the network when he revived. An example of this condition is when the notebook was alive and is part of a network in the office, brought into condition by or hibernates and then revived in other offices that have different network. Conflicts will arise if it turns addressing the network configuration is the same as the configuration of the previous office.

If the cause of the conflict that has been discussed above could have been avoided, the conflict would still occur malfunctions may occur if the DHCP server is used, which leads to loss of records on addressing system used. It is common in most routers.

Here's an easy way to change the ip address of your computer:

Click "Start" - "Run" and type "cmd" and press enter, simply click on the Windows 7 Start and type cmd in the box "Search Programs and Files".

Then type the command:

ipconfig / release

Then a window will appear as below

Then type the command again:

ipconfig / renew

The command "ipconfig / renew" This will create a new ip on our computers, in case of conflict ip, if not he would reuse the same ip previously.

To find ip what we wear, simply type the command:

ipconfig

You are still using the "Command Prompt" where we can also change the IP address of the computer we use the command "Netsh"

For those who use static ip of telecoms speedy, usually we are given a public ip itself, to change the ip can use the command:

netsh Set IP Address "local area connection" static 10.10.10.5 10.10.10.1 255.255.255.0 1

that

Local area connection = name of local computer networks

10.10.10.5 = ip address of your computer

= 255.255.255.0 subnet ip address our computer

10.10.10.1 = Gateway

1 = Address IP Gateway specified, usually always start number 1, depending on the setting masing2 router (eg gateway 10.10.10.1 - so figure that is loaded is 1)

If the ip address of the computer that we will change is in connection wireless / wifi eat the name "local area connections" we change it to "Wireless Network Connections" tegantung whether the name is already exchanged anything yet.

Then to replace its DNS servers follow the following command:

Netsh Interface IP Set dns "local area connection" static 110.137.8.2

where:

110.137.8.2 = dns server

Then if your computer will automatically use the ip address given by the router (DHCP) Type the command:

Netsh Interface IP Set Address "local area connection" DHCP

Then set dns also follow DHCP

Netsh Interface IP Set dns "local area connection" DHCP

Okay, so lets do it :D

Posted in: How To | Posted by : Admin

How To Give Password To Folder and protect your folder

How to Give Password to Folder and protect your folders can be done easily, either using software or not. A folder containing documents in word or pdf files of important data in the form it needs to be secured from the hands of ignorant office friends, classmates, or even your own family members. Surely not want dong suppose we've created office tasks or coursework then suddenly the data is copied by your friend? Maybe your friends grounded just borrow your laptop and it will not open up important files, but who knows if it is misused? This would be very annoying. Therefore we need to secure our data in order not to arbitrarily open by someone else by limiting access to the folder that contains important data. Then how do I give the password folder on your computer? There are two ways this can be achieved, namely:

Give the folder password without software

This step can be taken if you want to give the password without the help of software, so that you only utilize the existing facilities on the computer. This can be done for computers that operate on the Windows operating system yes. Here are the steps.

1. Open notepad, for the uninitiated notepad located in the Start -> All Programs -> accesorries -> notepad

2. Copy the code below and paste it into notepad

cls

ECHO OFF

title Folder Locker

if EXIST "Control Panel. {21EC2020-3AEA-1069-A2DD-08002B30309D}" goto UNLOCK

if NOT EXIST Locker goto MDLOCKER

: CONFIRMED

echo Are you sure u want to Lock the folder (Y / N)

set / p "cho =>"

if% cho% == Y goto LOCK

if% cho% == y goto LOCK

if% cho% == n goto END

echo Invalid choice.

goto CONFIRM

: LOCK

ren Locker "Control Panel. {21EC2020-3AEA-1069-A2DD-08002B30309D}"

attrib + h + s "Control Panel. {21EC2020-3AEA-1069-A2DD-08002B30309D}"

echo Folder locked

goto End

: UNLOCK

echo Enter password to unlock the folder

set / p "pass =>"

if NOT% pass% == TYPEPASSWORD goto FAIL

attrib -s -h "Control Panel. {21EC2020-3AEA-1069-A2DD-08002B30309D}"

ren "Control Panel. {21EC2020-3AEA-1069-A2DD-08002B30309D}" Locker

echo Folder Unlocked successfully

goto End

: FAIL

echo Invalid password

goto end

: MDLOCKER

md Locker

echo Locker created successfully

goto End

: End

3. In the code TYPEPASSWORD replace the text with the password that you wish

4. Keep a notepad by clicking File and then Save As, and save it with the name lock.bat save as type to All Files.

5. Open the file that we just open, wait a minute it will appear a new folder named Locker.

6. Move the files you want to secure into the Locker folder

7. Double-click again on the file lock.bat it will display a dialog if you want to lock the folder, type Y and then Enter

8. Folder Locker will be lost, but do not worry because this folder is hidden only by the system

9. To bring it back, double-click on lock.bat then be asked for a password to open it, type in your password and press Enter

10. Folder Locker has resurfaced and you can already see the file again.

Posted in: How To | Posted by : Admin

How To Use Laptop Battery For Long Life

How To Use Laptop Battery For Long Life

Energy Saving Tips Laptop

Laptops require energy to maximize its performance. But with its continuous flow of electricity on a laptop or computer can cause the breakdown of the expenditure of energy. On this occasion, I will share tips on how to save energy or laptop.

Listen following 9 tips that you can use to save energy consumption and laptops, electrical energy is guaranteed you will not be broken in use.

1. Set the monitor brightness and contrast

Possible for the lay person or a beginner in using computers, they rarely pay attention to their monitor settings. What is meant in this case is the level of illumination and contrast set too high will be able to spend a lot of energy. So for that you should be able to adjust the brightness and contrast, to adjust the monitor brightness and contrast using the button at the bottom of the monitor.

2. Turn off the monitor

The tips of the two is to turn off the monitor, especially the monitor type is the type of CRT (Cathode Ray Tubel), because these types of monitors consume more electricity. So, if you want to leave the laptop for a long time, you should turn off your monitor.

You can also setting up Windows to automatically direct die within a certain time, it can be done in a way, click "Control Panel-Options". In the "Power Options Properties" tab click the "Power Schemes". Then click the arrow in the "Power Schemes" and select "Home / Office desk". Then select the desired time on the "Turn Off Monitor" and click "Apply" and "OK".

3. Turn off hard disks

Although we are not doing anything on your computer, but your data will always be read from the hard disk (by the operating system and some applications). For this reason, the hard disk hard disk will be constantly spinning and of course this will consume energy. If you want to leave your laptop in a long time, then you should turn off your laptop hard disk. In the "Power Options Properties" and then click the "Power Schemes". Click the arrow in the "Power Schemes" and select "Home / Off desk". Then click "Turn off hard disks" and select the time. Then click "Apply" and "Ok".

4. Turn off other equipment

Turn off other equipment such as, speakers, external modems, scanners, Zip drives and printers. Because the equipment it is to spend a lot of energy. Often people leave the equipment in an active state, even when we were out for a long time.

5. Hibernate Mode

Hibernate mode is the facility to shut down, but not close or shut down the application that we are open earlier. This can be done by Mode "Hibernate". With this mode, the contents of main memory (RAM) will be stored in the hard disk. How to do the hibernate mode is as follows, the "Power Options" tab click on "Hibernate". Then click the close box "Enable Hibernation". Also click on the "Advanced" tab. In the "When I press the power button" and then click the arrows then click the "Hibernate". Click "Apply" and "Ok". After that press the "Power" on your computer. Hibernate mode is functioning, press the "Power" once again, your computer will turn on and will automatically open the application you have open earlier.

6. Standby Mode

In order to save energy, we recommend setting your monitor and hard disks are in the lowest part in standby mode. If you want to leave the laptop for a while, you should activate the standby mode. But you should know is, when the active standby mode data have not you save may be damaged or lost if your laptop is damaged. We recommend that you first save your data or documents before you activate this standby mode. Standby mode can be done in a way, click the "Start-Turn Off Computer" and click "Standby".

7. Battery Laptop

If you charge the battery of the laptop, make sure his charge process is complete. Because the charge that carried a half-half and then resumed, it will actually spend a lot of energy. If you want to travel, you should take 2 battery. To minimize battery consumption, you can use the features of Hibernate / Suspended or use an electric socket that plugs into a wall outlet.

8. USB Port

If while you are using the laptop and then you insert one into the USB port on your laptop, you should immediately released when it's finished it. Because the equipment is still plugged in the USB port, it can also spend energy on your PC or laptop. Should remove it if that’s enough of usage.

9. Scheme Energy consumption Laptop

Usually a laptop manufacturer also includes features and power management software. This software is very useful for the consumer laptop, because the software is able to regulate the use of a battery and electrical power is being used. In this software there are several options that can be used to determine the load of hard disks and other energy that is being used by the laptop. Among know the speed of the processor or monitor the proper lighting to be able to save the battery. This software also can be a watchdog for us to use a laptop.

Thus article 10 Energy Saving Tips Laptop and PC, hopefully this article can be helpful and useful for you. Thank you for visiting this blog.

Posted in: How To | Posted by : Admin

How to Check Your Graphics Card

How to Check Your Graphics Card

The above questions can be found frequently in the forum question and answer forum like Yahoo Answers, Google Ask etc. By knowing the details of the components on your PC, especially VGA card certainly has a lot of advantages to you, such as: you can easily find files Update VGA Driver for hardware devices that you use.

Because of the experience, when downloading the update file for the VGA driver, which prompted course VGA details Spoken like: Model, Series, Vendors, Operating System used. In order for the file you downloaded is not for other devices. If you download a driver until the incident to another device, be sure you use the hardware will not function properly.

To know the details of your PC VGA, there are two options you can use, using the manual method or using the services of a software specially designed to detect the type of VGA installed (installed) in a PC.

How To Manual
His name also means the manual, so there should be little effort to do so. Check back box or wrap perangkaht hardware VGA (VGA Card) that you buy either the Vendor (nVidia or AMD), Sub Vendor (Asus, Gigabyte, EVGA etc) Code and the series, I'm sure all the hardware devices are already listed in the box.

If the box or the packaging has been lost or depleted due eaten cat, you can see the information available on the graphics card, with a look at the code and the series of VGA card, you just try to unplug and notice the details.
using Software
This way one can only be done if the device you are using the VGA hardware is already installed in the system (drivers already installed). Software used is the GPU Z.

GPU Z is a mini tool from Techpowerup which is a software to provide complete information about the Video Card (graphics) and Procecsor APU on a computer or laptop.

GPU Z suport for all types of flat form either VGA AMD, Nvidia, and Intel, including the latest Intel Haswell Processor Graphics fed Code Name Iris.
Key Features of the GPU Z, among others:
1. Suport for AMD, Nvidia, and Intel Graphics
2. Displays VGA Display Adapter you use
3. Displaying the Default Clock and Clock Bost
4. Can be used to perform Back up Bios
5. No need to install, but there is an option if you want to put it on the Install system
6. Suport Windows XP, Windows 7, and Windows 8
After the run GPU Z will feature everything you need about you use VGA as product name, Series, GPU, Memory, etc. all of which are displayed in a tab. The following image is a screenshot of the display when running GPU Z

For those of you who want to and do not have a GPU Z, please follow the following link, and the file size is only 1.3 MB only.

Then if the GPU Z can only be used after the driver is installed, what if after buying VGA Card Used and we want to get a driver for the VGA card that I use but do not know for sure what the full specification of the VGA card Such?

The solution that I can give no 3, namely:
First way, if you are the user-made Assus VGA card, then on the official website there is the convenience provided to users who do not know for sure the hardware used.

Second way, users of AMD graphics cards can easily downloading drivers for all AMD products, with the help of tools designed specifically to detect, locate the driver that corresponds to the hardware, and download it directly to you.

Third way, for AMD and nVidia users who are not working anymore with the two options I mentioned earlier, please use the software detect the driver will install the drivers for all kinds of hardware very well.

Well how readers of all, I hope this article can help you in knowing the details of the VGA that you use either the PC or laptop....

Posted in: Computer, How To | Posted by : Admin